Tips to Install Natural Stone

Install natural stone not much different from installing ceramic. But there is little difference. Here are tips to install natural stone:


1. Before installed, first soak the water into the natural stone. Because natural stone has pores that are large so that when the paste is usually easy go straight.

2. When will be installed on the wall, peeled random (wounded with a hammer so that the uneven surface of the wall) so that natural stone will be stronger against the wall.

3. Use the special cement or cement instant that natural stone will be stronger stick.

4. Natural stone has a less precise fit. Deviation measures on natural stone can reach 5 mm or even 1 cm, using experienced craftsmen.

5. Relative weight of natural stone so you need more cement, sand quality is good and clean water as the glue pasting.

6. Do not let the former cement on the surface of the stone to dry. Stone has a porous nature (sucking water) so that when the cement aged stone surface to dry, it will be very difficult to remove.

7. After installation, brush and dry stone surface. And then coated with a liquid coating. If surface water is often exposed to anti-fungal rocks and moss and shiny until half years. If the course will dry much longer.